Oil barrel cleaning and drying blower use scheme
A customer in Qingdao, Shandong, contacted us that we needed a blower to dry the surface of the oil drum.
The customer's request is that a fan needs to be selected to quickly blow off the water droplets on the surface of the bucket in a short period of time. It is too slow to dry it by yourself. The second is that there are still traces and an improved solution is needed.
The original fan used by the customer is too noisy. It is a centrifugal fan. The sound is not big, the effect is not good, and the blow is not clean.
According to the situation expressed by the customer, it is concluded that the pressure of the fan is not enough, and the amount of air is not enough. It is necessary to have both. The pressure is small and there is no flow rate. There is no force in the air flow, so using our high pressure blower is the most suitable choice.
I also asked questions about connection methods and air knives. The customer chose a 2.2kw single impeller blower because the cross-sectional area of the outlet at the end is small. It is used by people to move their heads back and forth instead of fixed on the shelf. So, if you convert one, you can use either 2.2kw or 3kw.
I told the customer that compared with the centrifugal fan, although the flow rate is not so high, the pressure is high, and the connected pipe should not be too thick, it is better to be less than or equal to the fan outlet size.
The final customer chose a three-phase power 2.2kw to order one to see how it works. It can just blow off the water droplets on the surface of the object.
Customer feedback said that the effect is good, it is much stronger than the original one, and the noise is acceptable. It has been used and the effect has been improved.
Like the situation of this customer, they are similar to the air knife drying industry. They have similarities in common. Combined with the actual use requirements of customers, the selected models can basically meet the use effect.