The working principle of the industrial heat blower is as follows: After the power is turned on, the high-pressure blower or medium-pressure blower blows air into the heater, because the built-in electric heating wire, after the ordinary atmospheric air passes, the heat generated by the electric heating wire passes through. The cold air is heat exchanged to achieve the purpose of increasing the air temperature. 》，因为这一点，它的使用效果会更上一层楼 Because the fan itself will generate a certain amount of heat, why is the high-pressure blower hot air
? Because of this, its use effect will be even higher.
The K-type thermocouple at the air outlet timely feeds the detected air temperature to the temperature controller. The meter monitors the actual temperature of the work according to the set temperature, and transmits the relevant information back to the solid-state relay to control whether the heater works.
At the same time, the ventilator can use the air volume regulator (inverter, damper) to adjust the amount of air blowing, thereby realizing the control of the working temperature and air volume. In addition, the hot air blower is also equipped with an over-temperature protection circuit for the fan inlet and the motor, and an emergency brake switch for the main circuit to further improve the protection of the equipment.
Its main components are composed of three parts: industrial high-pressure fan, high-pressure fan, heater inside the box, and control circuit. Such products are often used in various industries such as electronics, food, pharmaceuticals, and packaging, and have a very broad prospect.
Industrial hot air fan is the first choice for modern industrial heat source upgrade. It is the best hot air source configuration for automatic machinery such as hot air conveying furnace, drying furnace, oven, packaging machine, etc.